Knowledge

Common Thicknesses of silicone heat transfer printing (Material/Ink Layer)

Common Sizes of the heat transfer printing (Format/Roll Width)

How to monitor details in real time during dispensing machine operation Glue status: Check the cartridge liquid level every 15-30 minutes (for two-component glue, monitor the A/B glue consumption rate

How to Clean and Maintain a Dispenser Machine. Single-Component Glue: Disassemble the cartridge and needle. Clean the valve and needle with a dedicated solvent (such as silicone cleaner). (Especially

Common problem handling of dispensing machines

What are the signs of mesh deformation besides loss of tension?

How many times can silicone mesh typically be reused?

Can the screen printing silicone mesh be reused?

Methods for Testing the Adhesion Fastness of Silicone Ink on Silicone Products 1. Introduction Silicone ink is widely used for printing on silicone products due to its excellent flexibility, durabilit

Common problems in the use of silicone ink

The Art and Science of Screen Printing on Silicone Products Abstract: Screen printing, a time-honored decorating technique, has found a unique and valuable application in the silicone product industry

Silicone Ink Pad Printing Parameter Control (Using Small-Area Silicone Buttons as an Example) Pad Tip Selection: Match the design shape to the substrate curvature. Pad Tip Hardness: 50-60 Shore A (sof