1.Preliminary preparation
Material selection: Choose suitable screen printing silicone (such as textile screen printing silicone), diluent (such as crude benzene, pure toluene), color paste, etc.
Equipment inspection: Make sure that the screen, squeegee, mixing container and other equipment are clean and undamaged, and choose a screen that is suitable for the mesh (usually 80-120 mesh).
2.Glue adjustment and color matching
Glue adjustment:
Mix the silicone and diluent in proportion (such as 1:1 or 100:2, adjusted according to the printing effect).
Stir evenly to form a clear and bright liquid gel.
Color matching:
Add an appropriate amount of color paste (generally 5%-8%) as needed, stir evenly to obtain the required color glue.
Be careful to avoid excessive color paste to avoid affecting the printing effect.
3.Printing operation
Printing base:
Pour the adjusted silicone into the screen and gently spread it with a squeegee.
Print 1-3 times as needed to ensure that the bottom print is flat.
Printing color:
Print each color 3-4 times, adjusted according to the sample effect.
Pay attention to the color matching and printing order when overprinting.
Covering:
After the last color printing, cover the surface, generally print twice to get the best effect.
When covering, add an appropriate amount of diluent to improve the leveling and glossiness of the silicone.
4.Curing and post-processing
Room temperature vulcanization curing:
Naturally dry at room temperature 15 degrees -35 degrees, or heat and dry at low temperature (such as 30 degrees).
Be careful to avoid high-temperature baking that causes bubbles or pinholes.
Post-processing:
After printing, clean the screen in time to prevent clogging.
Check the quality of printed products and rework or process unqualified products.
Precautions
Stir evenly: During the process of adjusting the glue and matching the color, ensure that the stirring is even to avoid caking or color difference.
Control the amount of diluent: Too much diluent will affect the adhesion of the silicone, and too little will affect the printing effect.
Printing environment: Keep the printing environment clean and dust-free to avoid impurities mixed in the silicone and affect the printing quality.
Safety protection: Wear protective equipment during operation to avoid silicone splashing into the eyes or skin and causing damage.

