Print silicone the PU leather tips
The first step: base printing with adhesive AD-9, and special curing agent 100:5
Printed 2 times, baked dry each time
The second step: print the middle layer of silicone as cross linker, the ratio of silicone and special curing agent is 100:5,
Print 2-3 times, drying each time
The third step: print the base silicone to reach the hardhess, and the ratio of silicone and curing agent is 10:1.printed about 10 times,
Printing times can be adjusted according to thickness requirements
Dry every time
Step 4: Print rounded silicone color printing. Multiple colors require register printing.
First print the white base, print 3-4 times and bake each time
Print dark yellow wings, print 3-4 times and bake each time
Print brown feathers, print 3-4 times each time to dry
Print black outline, print 3-4 times each time to dry
Step 5: Print the glossy cover with silicone, add color-changing powder, print it again, and dry it after it is completely leveled.
Then the final effect come out.