How to optimize the processing technology for embossing to reduce material damage and stress concentration?

Aug 18, 2025 Leave a message

How to optimize the processing technology for embossing to reduce material damage and stress concentration?

Burrs, cracks, or internal stress during processing can cause premature mold breakage or wear. The following steps require careful control:

Rough machining:
Use CNC milling or wire cutting to process the mold blank to avoid the high-temperature burns caused by traditional grinding wheels (which can lead to material embrittlement).

Allow a finishing allowance of 0.3-0.5mm to minimize surface damage during subsequent grinding.

Forming:
For complex patterns (such as 3D reliefs), use electro-discharge machining (EDM). Its non-contact processing method avoids microcracks caused by mechanical forces.

Corners and edges of the pattern should be rounded (R ≥ 0.1mm) to avoid stress concentration at sharp corners (which can easily break due to excessive force during pressing). Heat Treatment Process:
Alloy tool steel undergoes a "spheroidizing annealing → quenching → low-temperature tempering" process. Spheroidizing annealing reduces carbide segregation, quenching increases hardness, and low-temperature tempering (180-220°C) eliminates internal stresses and prevents deformation during use.
Aluminum alloys require an "aging treatment" (T6 process) to enhance hardness and deformation resistance.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry