Some steps show you how to do multip color molding heat tranfer badges:
---Setting the needle position ,Adjust the Pressure and speed to control the dispense amount of silicone
--- Mix the silicone with the catalyst ,add the color pigment ,mix well.
---Use a vacuum machine to draw out the air in the silicone
---Use dispensing machine dispense the silicone in the mold
---put the mold in the bake mold machine to bake dry
---put the mold on the vulcanize machine to do the curing
---Use freezer cool down the mold
---release the film from the mold
---transfer the finished badges to the position paper
---finshed
---press on the fabric
below is the video show you: