embossing washing test standard:
There is no unified standard for the embossing washing test. Different industries and enterprises often formulate corresponding specifications based on product use, materials, etc. The following are common reference indicators:
Appearance
Shape retention: refer to the sample or standard template to observe whether the embossed pattern is deformed, collapsed, or twisted after washing. For example, for convex and concave embossing on clothing, the outline of the pattern must be clear after washing, and the three-dimensional sense must not be significantly weakened. Shapes such as letters and patterns must not be distorted.
Color change: compare the color difference before and after washing based on the grayscale sample card or color fastness rating standard. The general rating is divided into 5 levels, with 5 being the best (no color change) and 1 being the worst (severe color change). For example, the color change of convex and concave embossing on textiles after washing usually needs to reach 3-4 levels or above.
Adhesion fastness
Peeling test: select the embossed part, gently peel it with a tool (such as a blade) to evaluate the adhesion between the embossing and the base material. The qualified standard is that the embossing is not easy to be peeled off in large pieces after washing, such as leather embossing, and the peeling area does not exceed 5%.
Friction test: Use a specific friction material (such as friction cloth) to rub the embossed surface at a specified number of times and pressure to check whether there is any discoloration or pattern wear. The friction fastness after washing generally needs to reach level 3-4.
Dimensional stability
Shrinkage measurement: Measure the length and width of the embossed product before and after washing, and calculate the shrinkage. For example, for clothing fabrics with embossed embossing, the warp and weft shrinkage are often required to be controlled within ±3%-±5%.
Physical properties
Tensile properties: For products with stretching requirements (such as elastic fabric embossing), test the changes in indicators such as tensile strength and elongation at break after washing to ensure that the product still has the required elasticity and strength.
Wear resistance: Use a wear tester to simulate daily friction and observe the degree of wear on the embossed surface after washing. For example, industrial embossed fabrics must meet the use requirements after a certain number of wear tests.
In terms of testing methods, daily washing conditions are often simulated, and washing temperature (such as 30℃, 40℃), time (such as 30 minutes), detergent type and dosage, number of washes (such as 5 times, 10 times), etc. are controlled. Some are also implemented according to international standards such as the American standard AATCC and the European standard ISO.
embossing washing test standard
May 22, 2025 Leave a message
Send Inquiry

