STEP 1: Mix embossing printing silicone ink AS6462A with catalyst AS-3 （Average dry curing catalyst)or AS-5(slow dry curing catalyst) at ratio 10:1 by the weight(use a electric scale) stir well then use a sharp squeegee on the 120 mesh count screen to scrape the silicone onto the interlining cloth print 1 time
STEP 2: Prepare embossing mould,remember the concave mould on the bottom then put the printed interlining on the mould ,noted that printed silicone inks side direction upward and use another same size fabric to face to face to bond ，finally, put the convex mold in position and cover above the cloth so that the mold can be completely combined
STEP 3: Setting molding machine temperature 160℃ by 50 seconds and heat press,after heat press,goods finished
Standard process :
Screen: 120 mesh count
Screen washing: oily washing water or AS-P-2;
Baking temperature: 160℃@50 seconds
Common screen printing procedures
Base coating: 1 time
Standard glue mixing process description
Glue mixing tools: electronic scale, glue mixing knife, glue mixing container
Operation video Link: