Differences in the properties of silk-screen silicone for oval machines and octopus printers
There may be some differences in the properties of silk-screen silicone for oval machines and octopus printers. These differences are mainly reflected in the following aspects:
1. Applicability and compatibility
Silicone for silk-screen printing for elliptical machines: It is usually designed and formulated according to the printing characteristics and needs of elliptical machines, and has good adaptability and compatibility. This type of silicone can usually better adapt to the parameters such as printing pressure, speed and scraper angle of elliptical machines, so as to obtain the best printing effect.
Silicone for silk-screen printing for octopus printers: It focuses more on adapting to the characteristics of multi-arm, multi-station and high-speed printing of octopus printers. This type of silicone needs to have higher fluidity and stability to ensure that it can be evenly and stably attached to the substrate during high-speed printing.
2. Viscosity and fluidity
Silicone for silk-screen printing for elliptical machines: It may have moderate viscosity and fluidity to adapt to the printing speed and pressure of elliptical machines. Too low viscosity may cause the printed pattern to be blurred or diffused, while too high viscosity may affect printing efficiency and quality.
Silk-screen silicone for Octopus printing presses: Due to the high-speed printing characteristics of Octopus printing presses, the silicone used may need to have lower viscosity and higher fluidity to ensure that the ink can be quickly and evenly distributed on the substrate.