【The problems existing in the application of silicone in the toy market】
1. Technical and Manufacturing Issues
Mold Burning: During the production of silicone toys, mold burning may occur. This issue arises because peroxide curing agents can generate significant heat when they come into contact with resin. If not addressed promptly, this can lead to mold damage. To prevent this, toys should be removed from the mold as soon as possible to reduce the heat's impact on the mold.
Dry on the Outside but Wet Inside: If moisture is not properly controlled during silicone toy production, the product may appear dry on the outside but remain uncured on the inside, affecting the toy's quality and appearance. The solution is to add the right amount of moisture and ensure thorough mixing so that the silicone fully cures.
Weak Tensile Strength: Silicone oil is sometimes added during production to improve silicone's fluidity. However, adding too much silicone oil can make the silicone too soft, reducing the toy's tensile strength. Therefore, it is important to control the amount of silicone oil added to minimize its impact on the silicone's performance.
Poor Aging Resistance: Silicone toys may experience aging issues such as discoloration and cracking after long-term use. This is often due to the excessive addition of silicone oil or other chemicals. To ensure the toy's durability, the addition of silicone oil and other chemicals should be carefully controlled, and high-quality silicone materials should be used.
2. Market Demand and Competition Issues
Intensified Market Competition: As the silicone toy market continues to expand, more and more companies are entering this field, leading to increasing competition. To stand out in the market, companies need to continuously innovate and improve product quality and service levels.
Diversified Consumer Demand: Consumer demand for silicone toys is becoming increasingly diverse. In addition to requiring products to be safe, eco-friendly, and healthy, they also seek innovation and personalization. Companies need to thoroughly understand market needs and design products that align with consumer expectations.
3. Legal and Regulatory Issues
Regulatory Compliance: As children's products, silicone toys must adhere to strict laws and regulations. For example, the products need to meet relevant safety and environmental standards. Companies must closely monitor regulatory changes to ensure their products comply with these requirements.
Quality Testing: To ensure the quality and safety of silicone toys, companies must conduct rigorous quality testing. This includes testing raw materials, monitoring the production process, and inspecting finished products. Companies should establish a comprehensive quality control system to ensure that their products meet the required standards.