Platinum curing agent is a catalyst used for curing liquid silicone, with the following characteristics:
I. Performance characteristics
High-efficiency catalysis: Platinum curing agent has very high catalytic activity, which can quickly induce the cross-linking reaction of liquid silicone at a lower temperature, so that silicone changes from liquid to solid. Compared with other types of curing agents, platinum curing agent usually cures faster, which can greatly shorten the production cycle.
Colorless and odorless: Platinum curing agent does not produce any odor or harmful substances during the curing process. The cured silicone products have good transparency and gloss, which are suitable for products with high appearance requirements, such as medical supplies, food contact materials, high-end electronic products, etc.
Good stability: Platinum curing agent has good chemical stability and is not easily oxidized, decomposed or inactive. During storage and use, as long as you pay attention to avoid contact with substances containing sulfur, phosphorus, nitrogen and other elements, platinum curing agent can remain active for a long time.
Strong weather resistance: The cured silicone products have excellent weather resistance and can maintain stable performance for a long time under various harsh environmental conditions. For example, under high temperature, low temperature, ultraviolet radiation, humidity and other environments, the physical and chemical properties of silicone products are basically unaffected.
2. Usage method
Accurate measurement: According to the formula and usage requirements of liquid silicone, accurately measure the amount of platinum curing agent. Generally speaking, the amount of platinum curing agent is small, usually between 0.1% and 1% of liquid silicone. Too much or too little will affect the curing effect and performance of silicone.
Mix evenly: Mix the platinum curing agent and liquid silicone thoroughly. Mixing can be done with agitators, dispersers and other equipment to ensure that the curing agent is evenly distributed in the silicone. The mixing time is generally a few minutes to more than ten minutes, depending on the mixing equipment and the viscosity of the silicone.
Control temperature: The curing speed of platinum curing agent is greatly affected by temperature. At lower temperatures, the curing speed is slower; at higher temperatures, the curing speed is faster. Therefore, when using platinum curing agent, it is necessary to control the temperature according to the actual situation to obtain the best curing effect. Generally speaking, the curing temperature of platinum curing agent is between room temperature and 150℃.
Avoid pollution: When using platinum curing agent, avoid contact with substances containing sulfur, phosphorus, nitrogen and other elements to avoid reducing the activity of the curing agent. At the same time, the operating environment should be kept clean to avoid dust, impurities and other contamination of silicone products.
3. Application fields
Medical field: Since silicone products cured with platinum curing agent are non-toxic, tasteless and biocompatible, they are widely used in the medical field, such as making medical devices, medical catheters, prostheses, breast augmentation materials, etc.
Food contact field: Silicone products cured with platinum curing agent meet the safety standards of food contact materials and can be used to make food molds, food packaging materials, tableware, etc.
Electronic field: Silicone products cured with platinum curing agent have good insulation performance, high temperature resistance and chemical corrosion resistance, and can be used to make packaging materials for electronic components, buttons and sealing rings of electronic equipment, etc.
Other fields: Platinum curing agent can also be used to make cosmetic packaging materials, automotive parts, toys and other products.
Platinum catalyst characteristics for curing liquid silicone
Oct 23, 2024 Leave a message
Previous
fetures of ANYSIL silicone inkSend Inquiry

