How to store liquid silicone ?

Sep 14, 2024 Leave a message

The storage method of liquid silicone is crucial to maintaining its performance and quality. Here are some key storage points:

1. Storage environment requirements
Temperature control: Liquid silicone should be stored in an environment with a temperature between 0 and 30°C to avoid adverse effects of too high or too low temperatures. Especially for medical liquid silicone, the storage environment temperature should be less than 37°C.
Ventilation and coolness: The storage environment needs to be ventilated and cool to reduce the physical or chemical changes of silicone due to environmental factors.
Dryness: Liquid silicone easily absorbs moisture, so the storage environment must be kept dry to avoid humid environments that cause silicone quality to deteriorate.
2. Packaging and sealing
Packaging selection: Liquid silicone is usually packaged in iron barrels or plastic barrels to ensure its sealing. Packaging specifications may vary depending on the product, and common ones are 20kg/barrel and 200kg/barrel.
Sealed storage: After use, liquid silicone should be sealed and stored in time to prevent air and impurities from entering and affecting its performance. It can be stored in a special sealed bag or container.
3. Avoid light and impurities
Avoid direct sunlight: Liquid silicone is easily damaged by ultraviolet rays, so it should be stored away from direct sunlight and preferably stored in a cool place.
Prevent impurities from mixing: During storage and use, care should be taken to prevent impurities from mixing into liquid silicone to avoid affecting its use effect.
4. Storage period
The storage period of liquid silicone is usually 6 months to 1 year, depending on the quality of the product and storage conditions. After the storage period, the quality of liquid silicone may gradually decrease and lose its original performance. Therefore, it is recommended to check the storage period and appearance of liquid silicone before use.

5. Other precautions
Safe use: When storing and using liquid silicone, pay attention to labor protection wear and avoid direct contact with skin and eyes. If accidentally contacted, rinse immediately with plenty of water and seek medical attention.
Avoid mixing: For two-component liquid silicone, do not mix components A and B and store them to avoid curing reaction that makes them unusable.
Follow safety regulations: When storing and using liquid silicone, follow national or local safety regulations and standards.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry