How to set up the dispening machine's needle path on Logoshop

set up the needle path on Logoshop.

The specific operation method is as follows:

Load the molding design artwork into Logoshop software

------Click "Machine Pointing" and align it with the cross

-------Click the "Polyline" command on the left side of the software menu

-------Select the color to draw the path of syringe needle 1. When drawing the line, keep the needle in the middle position. After drawing, press the right mouse button OK to save;

-------Select the color to draw the path of dispensing needle 2,3... you need to set the path of the needle as described above and then save it;

-------After all the paths of the needle are drawn, save it and download to USB driver

-------Insert the USB driver into the operating controller of the dispensing machine and press the number "1" to select "ENT". After the data is loaded, you can unplug the USB driver;