How to add the silicone thinner?

Adding method of silicone thinner
Preparation:
Clean containers and tools: Use clean, dry and impurity-free containers to hold liquid silicone and diluents, and prepare clean stirring tools, such as glass rods, electric stirrers, etc., to avoid mixing impurities and affecting the quality of silicone.
Ensure good ventilation: If an organic solvent-based diluent is used, due to its toxicity and volatility, the operating site must maintain good ventilation conditions. The ventilation equipment can be turned on or the operation can be carried out in a well-ventilated environment to protect the health of the operator.
Adding and stirring:
Adding diluent slowly: Slowly pour the selected diluent into the liquid silicone, stirring at a uniform speed with a stirring tool while pouring to prevent too many bubbles from being generated when the diluent is poured in quickly, which will affect the performance of the silicone.
Stir well and evenly: Continue stirring for a few minutes to more than ten minutes to ensure that the diluent and liquid silicone are fully mixed to form a uniform liquid mixture. Whether the mixture is fully mixed can be judged by observing whether the appearance of the mixture is uniform and whether there are obvious stratification or particles.
During the entire process of adding and using, it is necessary to strictly control the addition ratio and take safety precautions to ensure that the diluted silicone can meet the processing requirements and maintain good performance.