How is silicone colored in garment screen printing?
Silicone, due to its excellent physical and chemical properties, has been widely used in the field of garment screen printing. However, silicone is typically transparent or semi-transparent by nature. So how is coloring achieved in the garment screen printing process? The coloring process of silicone not only affects the aesthetic appeal of the product but also plays a crucial role in its market competitiveness. Below is a detailed introduction to the silicone coloring process in garment screen printing.
Silicone Coloring Technology in Garment Screen Printing
Mixing and Dilution
The first step in silicone coloring is mixing and dilution. Approximately 150 grams of silicone printing material is squeezed into a plastic cup, and an appropriate amount of thinner is added in proportion. The mixture is stirred evenly until a clear and glossy liquid gel is formed. This step is key to ensuring the silicone can evenly adhere to the garment fabric.
Color Mixing
The next step is the color mixing process. Based on actual needs, around 5% (this percentage may vary slightly but should not exceed 10%) of color paste is added to the diluted silicone and stirred again to obtain the desired color. The amount of color paste needs to be precisely controlled to ensure the accuracy and consistency of the color.
Curing Agent
Afterward, a curing agent is added according to the required ratio, and the mixture is stirred again to enable the silicone to cure quickly.
Printing Process
Printing is the core stage of silicone coloring. The prepared silicone is poured into a screen and applied onto the fabric through multiple layers of printing (typically 5-8 layers for the base, and 2-3 layers for the color). This ensures that the silicone is evenly coated on the fabric, achieving the desired thickness and color effect. During the printing process, the viscosity and number of prints can be adjusted as needed to achieve the best results.
Curing and Shaping
After printing, the garment is heated and dried using a baking machine. During the drying process, care must be taken to ensure the silicone levels out completely and dries on the surface, avoiding the formation of bubbles or pinholes.

