The effects of diluents on the viscosity and mechanical properties of silicone are mainly reflected in the following aspects:
1. Effect on viscosity
Reducing viscosity: One of the main functions of diluents is to reduce the viscosity of silicone, making it easier to coat or print. Common diluents such as ethanol, ethyl acetate, butanone, etc. can effectively dissolve the adhesive in silicone, thereby adjusting its viscosity to the desired level.
Controlling fluidity: By adjusting the amount of diluent, the fluidity of silicone can be controlled to meet the needs of different processes and applications. However, excessive dilution may cause the fluidity of silicone to be too strong, affecting the clarity and precision of the printed pattern.
2. Effect on mechanical properties
Reducing tensile and tear strength: The addition of diluents will weaken the intermolecular forces of silicone, resulting in a decrease in tensile and tear strength with increasing addition. This performance degradation is directly related to the reduction in crosslinking density because the diluent dilutes the ratio of crosslinker to base polymer.
Affecting hardness: The addition of a moderate amount of diluent will slightly reduce the hardness of silicone after curing. For example, when silicone oil is used as a diluent, the hardness of liquid silicone after curing will decrease by 1 degree for every 2% of silicone oil added. This change in hardness may affect the applicability of silicone in specific applications.
Potential risk of damaging mechanical properties: If the amount of diluent is not appropriate, it will directly damage the key mechanical properties of silicone rubber, such as tensile modulus. For example, in the RTV silicone rubber system, excessive use of diluents such as low molecular weight α, ω-dihydroxy polydimethylsiloxane or methyl silicone oil will lead to a significant decrease in mechanical properties.

