Directly screen printing
1️⃣ Glue adjustment and dilution: Mix 150g of silicone with 150g of diluent and stir evenly until it becomes a glossy liquid gel. 🔄
2️⃣ Color glue adjustment: Add 5% color paste to the diluted silicone and stir thoroughly to obtain the silicone of the desired color. 🎨
3️⃣ Printing: Pour the adjusted silicone into the screen and start printing. The base print is generally printed 5-8 times, and the enhanced thickness can be printed more than 10 times. Color printing 2-3 times to achieve the desired color effect. 🖨️
4️⃣ Vulcanization molding: Natural drying at room temperature of 15-35 degrees, or heating and drying after each printiing
5️⃣ Finishing: Pour out the unprinted silicone on the screen, and gently wipe the screen with diluent to prevent clogging of the mesh. 🧼
Silicone transfer for screen printing:
Silicone, transfer glue and hot melt glue are screen printed onto high temperature release film through screen printing, which can produce glossy, matte, reflective, double-layer effects, etc. 🌈
Molding silicone transfer: Open the mold, pour the liquid mold silicone into the copper mold, use the machine to vulcanize and shape, attach hot melt glue after cooling and demolding, remove the mucous film, and attach the negative film. Suitable for making products with high thickness and strong three-dimensional sense. 🏗️
Silicone transfer for lettering film: Laser lettering on the silicone lettering film substrate, with a negative film. Low cost, fast production, diverse materials, can produce reflective, multi-color logos, etc. 🖋️
Transfer method:
Adjust the parameters of the heat press machine to 150 degrees and the pressure to 4-5kg. Place the clothing flat on the working surface of the heat press machine, and place the heat press film up and the glue side down in the corresponding position. Press for 15 seconds on both sides, then tear it apart after it cools down.
