video
3D Silicone Heat Transfer Label Sticker

3D Silicone Heat Transfer Label Sticker

Team Patch Football Patch 3D Custom Flock Silicone Tpu Heat Transfer Logo Label Flock Sticker Patch For Clothing

Product Introduction

The production process of silicone thermal transfer labels is a delicate process involving multiple steps, mainly including material preparation, pattern printing, silicone surface treatment, transfer and subsequent processing. The following is a detailed introduction to the production process:
1. Material preparation
Silicone material: Select silicone suitable for thermal transfer. It is usually necessary to determine the model and performance of silicone according to the specific application scenario and requirements.
Transfer film: Use high-temperature resistant release film as the carrier for transfer to ensure that the pattern can be completely and clearly transferred to the silicone during the transfer process.
Color paste and curing agent: According to design requirements, select appropriate color paste and curing agent to adjust the color and curing performance of silicone.
Thermal transfer coating glue: used to enhance the adhesion between silicone and pattern, ensuring that the pattern after transfer is firm and does not fall off.
Hot melt adhesive: plays a bonding role in the transfer process, tightly combining the pattern with silicone.
2. Pattern printing
Pattern design: First, design the pattern to be printed according to the needs, and use design software to create and edit.
Pattern printing: Print the designed pattern on heat-resistant adhesive paper through a color inkjet printer or other suitable printing equipment. After printing, it needs to be left for a period of time (usually 15 to 20 minutes) to allow the pattern to fully dry and fix.
3. Silicone surface treatment
Spraying treatment agent: Spray silicone treatment agent on the surface of the silicone substrate and let it dry. The purpose of this step is to improve the inertness of the silicone surface, enhance the adhesion of silicone, and make the printed pattern more firm.
4. Transfer
Place the pattern: Place the printed pattern (with the pattern facing down) on the treated silicone substrate to ensure that the pattern fits tightly with the silicone surface.
Heating and pressurizing: Adjust the time and temperature according to the requirements of the thermal transfer equipment (usually about 20 seconds), close the heating plate of the equipment for heating and pressurizing. After the time alarm of the thermal transfer equipment, lift the heating plate and quickly uncover the pattern paper.
5. Subsequent processing
Baking and curing: Put the transferred silicone product into the oven for baking and curing. The baking temperature and time need to be determined according to the model and performance of the silicone, usually including low-temperature baking and high-temperature baking (such as baking at 80 degrees for 30 minutes and then baking at 150 degrees for 30 minutes).
Cooling and inspection: After baking, take out the product and cool it naturally to room temperature, and then conduct quality inspection. Check whether the pattern is complete, clear, and has good adhesion.
Precautions
During the entire production process, pay attention to keeping the environment clean and dry to avoid the impact of dust and impurities on product quality.
Materials such as silicone and thermal transfer coating glue need to be stored in a sealed manner and avoid direct sunlight and high temperature environment to prevent deterioration.
During the operation, wear protective equipment such as gloves and masks to prevent the material from irritating the skin and respiratory tract.
High-quality silicone thermal transfer label products can be produced through the fine operation and control of the above steps.

20240606091843

Hot Tags: 3d silicone heat transfer label sticker, China, suppliers, manufacturers, factory, customized, buy, free sample

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag